Branch table 90 degree

90 degree Branch Table connection type

H
E
A
D
E
R

S
I
Z
E
S

1½

B R A N C H S I Z E S

D = Tee & Reducer
S = Sockolet
V = SW Tee W/ Insert

E = Reducing Tee
T = Tee
W = Weldolet

P = Reinforcing Pad
U = Unreinforced Stub-In

D or V may be substituted by E.
S or W may be substituted by P (minimum pad width = 1").
P = Reinforcing pad with minimum thickness equal to header thickness, and width equal to 1/2 of the branch nominal pipe size. Drill 1/8" (3mm) diameter hole in each pad section for venting (a weld gap is acceptable as a means of venting).