Dimensions Weld Neck Flanges & Stud Bolts ASME B16.5
Weld Neck flange

Important  Information

Notes:

Measuring lengths of Stud Bolts and Hex bolts
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter (Note 1)
≤24
1.6 mm (0.06 in)
>24
±3.2 mm (±0.12 in)
Diameter Hub at Base
≤24
1.6 mm (0.06 in)
>24
±3.2 mm (±0.12 in)
Inside Diameter
≤10
±0.8 mm (±0.03 in)
12 thru 18
1.6 mm (0.06 in)
≥20
+3.2 mm / -1.6 mm
(±0.12 in / -0.06 in)
Diameter Hub at Point of Welding
≤5
+2.4 mm / -0.8 mm
(±0.09 in / -0.03 in)
≥6
+4.0 mm / -0.8 mm
(+0.15 in / -0.03 in)
Drilling
Bolt Circle
1.6 mm (0.06 in)
Bolt Hole Spacing
±0.8 mm (±0.03 in)
Eccentricity Bolt Circle
≤2½
0.8 mm max (0.03 in max)
≥3
1.6 mm max (0.06 in max)
Thickness
≤18
+3.2 mm / -0 (+0.12 in / -0)
≥20
+4.8 mm / -0 (+0.18 in / -0)
Length thru Hub
≤10
1.6 mm (0.06 in)
≥12
±3.2 mm (±0.12 in)
Diameter Contact Face
1.6 mm RF (0.06 in)
±0.8 mm (±0.03 in)
6.35 mm RF (0.25 in)
±0.4 mm (±0.01 in)

Tongue & Groove
±0.4 mm (±0.01 in)
Male-Female
±0.4 mm (±0.01 in)
Welding bevel

1 mm (0.03 in)
2 mm (0.07 in)
6 mm (0.23 in)

(NOTE 1)
Tolerances not listed in
ASME B16.5–2013

 

Top of Page