 |
ASTM A335 grade P2 Characteristics |
The types of alloy steel covered by ASTM A335 specification are designed with prefix 'P' from P1 to P91/92. Grades P11/P22 and P91 are typically found in power stations, whereas grades P5 and P9 are more common for application in the petrochemical industry.
Chemical Properties Gr.P2
| UNS equivalent |
C | Mn | P | S | Si | Cr | Mo |
| K11547 | 0.10-0.20 | 0.30-0.61 | 0.025 | 0.025 | 0.10-0.30 | 0.50-0.81 | 0.44-0.65 |
Mechanical Properties Gr.P2
| UNS Number |
Yield Strength ksi |
Tensile Strength ksi |
Elongation % |
Rockwell | Brinell |
| K11547 | 30 | 55 | 30 | - | - |
Diameter tolerances
| A335 Pipe | Over | Under | ||
| NPS (DN) | in | mm | in | mm |
| 1/8 to 1 1/2 (DN 6 to 40) | 1/64 | 0.4 | 1/64 | 0.4 |
| Over 1 1/2 to 4 (DN 40 to 100) | 1/32 | 0.79 | 1/32 | 0.79 |
| Over 4 to 8 (DN 100 to 200) | 1/16 | 1.59 | 1/32 | 0.79 |
| Over 8 to 12 (DN 200 to 300) | 3/32 | 2.38 | 1/32 | 0.79 |
| Over 12 / (DN 300) | +/- 1% of the specified outside diameter | |||
Wall thickness tolerances
| Tolerances are in % |
| 1/8 to 2 1/2 (6 to 65), all t/D: over 20%, under 12.5% |
| Above 2 1/2 (65), t/D < or = 5%: over 22.5%, under 12.5% |
| Above 2 1/2 (65), t/D > 5%: over 15%, under 12.5% |
| t = Specified Wall Thickness; D = Specified Outside Diameter) |
Equivalent Designation
| DIN vs EN vs ASTM | ||
| DIN Werkstoff Nummer |
EN | ASTM |
| 1.5415 | 16Mo3 | A335 Grade P1 |
| 1.7335 | 13CrMo4-5 | A335 Grade P11, P12 |
| 1.7380 | 10CrMo9-10 | A335 Grade P22 |
| 1.7362 | X11CrMo5 | A335 Grade P5 |
| A335 Grade P9 | ||
| 1.4903 | X10CrMoVNb9-1 | A335 Grade P91 |
ASTM A335 Grade P2 specification covers seamless ferritic alloy steel pipes with nominal and minimum wall thicknesses intended for use at high temperatures. ASTM A335 Grade P2 alloy steel Seamless Pipes ordered to this specification is suitable for bending, flanging, and similar forms, and for fusion welding. Selection will depend on design, service conditions, mechanical properties, and high-temperature characteristics.ASTM A335 grade P2 pipes can be either hot finished or cold drawn with the finishing treatment. ASTM A335 pipes can be supplied in quenched and tempered conditions.
Related Post(s)
ASTM A335 is a standard specification for seamless ferritic alloy-steel pipe intended for high-temperature service...
