Dimensions Threaded Tees - Crosses ASME B16.11

‎‏‎‏

Class 2000
NPS	Min Length of Thread		Outside Dia of Band D	Center to End A	Min WT
	B	J
1/2	10.9	13.6	33	28	3.18
3/4	12.7	13.9	38	33	3.18
1	14.7	17.3	46	38	3.68
1.1/4	17	18	56	44	3.89
1.1/2	17.8	18.4	62	51	4.01
2	19	19.2	75	60	4.27
2.1/2	23.6	28.9	92	76	5.61
3	25.9	30.5	109	86	5.99
4	27.7	33	146	106	6.55

Class 3000
NPS	Min Length of Thread		Outside Dia of Band D	Center to End A	Min WT
	B	J
1/2	10.9	13.6	38	33	4.09
3/4	12.7	13.9	46	38	4.32
1	14.7	17.3	56	44	4.98
1.1/4	17	18	62	51	5.28
1.1/2	17.8	18.4	75	60	5.56
2	19	19.2	84	64	7.14
2.1/2	23.6	28.9	102	83	7.65
3	25.9	30.5	121	95	8.84
4	27.7	33	152	114	11.18

Class 6000
NPS	Min Length of Thread		Outside Dia of Band D	Center to End A	Min WT
	B	J
1/2	10.9	13.6	46	38	8.15
3/4	12.7	13.9	56	44	8.53
1	14.7	17.3	62	51	9.93
1.1/4	17	18	75	60	10.59
1.1/2	17.8	18.4	84	64	11.07
2	19	19.2	102	83	12.09
2.1/2	23.6	28.9	121	95	15.29
3	25.9	30.5	146	106	16.64
4	27.7	33	152	114	18.67

General notes..

• Dimensions are in millimeters unless otherwise indicated.
• Dimension B is minimum length of perfect thread.
  The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than J.

Dimensions Thredolet®

Thredolet® reducing
Thredolet reducing utilizes the basic Weldolet however the branch affixes by way of a thread just inside the top of the olet...

Article

Thredolet® Size on Size
Thredolet size on size utilizes the basic Weldolet however the branch affixes by way of a thread just inside the top of the olet...

Article

Dimensions Threaded Flanges

Threaded Flanges
Threaded Flanges are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection...

Article