|
Face to Face dimensions of flanged valves |
| NPS | Gate Solid Wedge Double Disc |
Gate Conduit |
Plug Short Pattern |
Plug Regular Pattern |
Plug Venturi Pattern |
| 1/2 | 108 | ||||
| 3/4 | 117 | ||||
| 1 | 127 | 140 | |||
| 1.1/4 | 140 | ||||
| 1.1/2 | 165 | 165 | |||
| 2 | 178 | 178 | 178 | 178 | |
| 2.1/2 | 190 | 190 | 190 | ||
| 3 | 203 | 203 | 203 | 203 | |
| 4 | 229 | 229 | 229 | 305 | 229 |
| 5 | 254 | 254 | 381 | ||
| 6 | 267 | 267 | 267 | 394 | 394 |
| 8 | 292 | 292 | 292 | 457 | 457 |
| 10 | 330 | 330 | 330 | 533 | 533 |
| 12 | 356 | 356 | 356 | 610 | 610 |
| 14 | 381 | 381 | 686 | 686 | |
| 16 | 406 | 406 | 762 | 762 | |
| 18 | 432 | 432 | 864 | 864 | |
| 20 | 457 | 457 | 914 | 914 | |
| 22 | 508 | ||||
| 24 | 508 | 508 | 1067 | 1067 | |
| 26 | 559 | 559 | |||
| 28 | 610 | 610 | |||
| 30 | 610 | 660 | |||
| 32 | 711 | ||||
| 34 | 762 | 1016 | |||
| 36 | 711 | 813 |
| NPS | Plug Round Port Full Bore |
Globe Lift Check Swing Check |
Y-Globe Y-Swing Check |
Ball Long Pattern |
Ball Short Pattern |
| 1/2 | 108 | 140 | 108 | 108 | |
| 3/4 | 117 | 152 | 117 | 117 | |
| 1 | 176 | 127 | 165 | 127 | 127 |
| 1.1/4 | 140 | 184 | 140 | 140 | |
| 1.1/2 | 222 | 165 | 203 | 165 | 165 |
| 2 | 267 | 203 | 229 | 178 | 178 |
| 2.1/2 | 298 | 216 | 279 | 190 | 190 |
| 3 | 343 | 241 | 318 | 203 | 203 |
| 4 | 432 | 292 | 368 | 229 | 229 |
| 5 | 356 (1) | ||||
| 6 | 406 (1) | 470 | 394 | 267 | |
| 8 | 495 | 597 | 457 | 292 | |
| 10 | 622 | 673 | 533 | 330 | |
| 12 | 698 | 775 | 610 | 356 | |
| 14 | 787 | 686 | 381 | ||
| 16 | 914 (2) | 762 | 406 | ||
| 18 | 978 (3) | 864 | |||
| 20 | 978 (3) | 914 | |||
| 22 | 1067 (3) | ||||
| 24 | 1295 (3) | 1067 | |||
| 26 | 1295 (3) | ||||
| 28 | 1448 (3) | ||||
| 30 | 1524 (3) | ||||
| 32 | |||||
| 34 | |||||
| 36 | 1956 (3) |
Notes..
- (1) Globe and horizontal lift check only.
The face-to-face and end-to-end dimension for Class 150 steel flanged swing check valves in NPS 5 is 330 and in NPS 6 is 356. - (2) Globe and horizontal lift check only.
The face-to-face and end-to-end dimension for Class 150 steel flanged swing check valves in NPS 16 is 864. - (3) Swing check only.
General notes..
- Dimensions are in millimeters unless otherwise indicated.
- The face-to-face dimension for flanged Valves is the distance between the extreme ends which are the gasket contact surfaces.
- End-to-End dimensions apply to flanged Valves where the gasket contact surfaces are not located at the extreme ends of the Valve. The distance between the extreme ends is described as the end-to-end dimension and applies to flanged Valves like.. Ring Joint, large or small female and large or small groove.
Related Post(s)
End to End dimensions of buttwelding Valves
The pages shows you all the End to End dimensions of buttwelding Valves...
The pages shows you all the End to End dimensions of buttwelding Valves...
