Dimensions Socket Weld Tees & Crosses ASME B16.11

‎‏ ‎‏

Class 3000
NPS	Socket Bore	Depth Socket	Bore dia
	B	J	D
1/2	21.95 21.70	10	16.6 15
3/4	27.30 27.05	13	21.7 20.2
1	34.05 33.80	13	27.4 25.9
1.1/4	42.80 42.55	13	35.8 34.3
1.1/2	48.90 48.65	13	41.7 40.1
2	61.35 61.10	16	53.5 51.7
2.1/2	74.20 73.80	16	64.2 61.2
3	90.15 89.80	16	79.5 46.4
4	115.80 115.45	19	103.8 100.7
NPS	Socket WT	Body WT	Center to bottom of socket
	C	G	A
1/2	4.65 4.10	3.75	15.5
3/4	4.90 4.25	3.90	19.5
1	5.70 5.00	4.55	22
1.1/4	6.05 5.30	4.85	27
1.1/2	6.35 5.55	5.10	32
2	6.95 6.05	5.55	38
2.1/2	8.75 7.65	7.00	41.5
3	9.50 8.30	7.60	57.5
4	10.70 9.35	8.55	66.5

 

Class 6000
NPS	Socket Bore	Depth Socket	Bore dia
	B	J	D
1/2	21.95 21.70	10	12.5 11
3/4	27.30 27.05	13	16.3 14.8
1	34.05 33.80	13	21.5 19.9
1.1/4	42.80 42.55	13	30.2 28.7
1.1/2	48.90 48.65	13	34.7 33.2
2	61.35 61.10	16	43.6 42.1
NPS	Socket WT	Body WT	Center to bottom of socket
	C	G	A
1/2	5.95 5.20	4.80	19.5
3/4	6.95 6.05	5.55	22.5
1	7.90 6.95	6.35	27
1.1/4	7.90 6.95	6.35	32
1.1/2	8.90 7.80	7.15	38
2	10.90 9.50	8.75	41

 

General notes..

• Dimensions are in millimeters unless otherwise indicated.
• Socket Bore (B) - Maximum and minimum dimensions.
• Bore Diameter (D) - Maximum and minimum dimensions.
• Socket wall thickness - (C) - Average of Socket wall thickness.
• Dimensional tolerances center to bottom of socket - (A)
  NPS 1/2 and NPS 3/4 = +/- 1.5 mm
  NPS 1 to NPS 2 = +/- 2 mm
  NPS 2.1/2 to NPS 4 = +/- 2.5 mm

Related Post(s)

Dimensions Threaded Tees
Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping)...

Article