× NPS 1/2 NPS 3/4 NPS 1 NPS 1.1/4 NPS 1.1/2 NPS 2 NPS 2.1/2 NPS 3 NPS 3.1/2 NPS 4 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16  ▸ NPS 18 NPS 20 NPS 24

Dimensions Lap Joint Flanges & Stud Bolts ASME B16.5

Lap Joint flange
OTHER DIA NPS 18 ID=462.3 r=13
CLass 150 300 600 900 1500 2500
DIA A 505 533 545 565 597 ...
DIA D 635 710 745 785 915 ...
THK B 39.7 60.4 82.6 101.6 162 ...
DIA K 577.9 628.6 654 685.8 774.7 ...
H 97 130 152 190 276 ...
NO. L 16 24 20 20 16 ...
DIA L 31.8 34.9 44.5 50.8 73 ...
Stud Bolts Diameter x Length
DIA (in) 1.1/8 1.1/4 1.5/8 1.7/8 2.3/4 ...
 lgth (mm 145 195 275 325 495 ...

Notes..

  • Dimensions are in millimeters unless otherwise indicated.
  • The length of the Stud Bolt does not include the height of the chamfers (points).
  • Important! please read this short article

Dimensional Tolerances of Lap Joint Flanges ASME B16.5
Outside Diameter *
Tolerances not listed in ASME B16.5 2013
≤ 24 = 1.6 mm
> 24 = ± 3.2 mm
Inside Diameter
≤ 10 = ± 0.8 mm
≥ 12 = + 1.6 mm / - 0 mm
Outside Diameter of Hub
≤ 12 = + 2.4 mm / - 1.6 mm
≥ 14 = ± 3.2 mm
Diameter of Counterbore
Same as for Inside Diameter
Drilling
Bolt Circle = 1.6 mm
Bolt Hole Spacing = ± 0.8 mm
Eccentricity of Bolt Circle
≤ 2.1/2 = 0.8 mm max.
≥ 3 = 1.6 mm max.
Thickness
≤ 18 = + 3.2 mm / - 0
≥ 20 = + 4.8 mm / - 0
Length thru Hub
≤ 18 = + 3.2 mm / - 0.8 mm
≥ 20 = + 4.8 mm / - 1.6 mm
Diameter of Contact Face
1.6 mm Raised Face = ± 0.8 mm
6.35 mm Raised Face
Tongue and Groove / Male-Female
± 0.4 mm


Studs are measured parallel to the axis (L) from the first to the thread without the chamfers (points). S = free threads equals 1/3 time bolt dia

Measuring lengths of Stud Bolts

 

Hex bolts are measured from under the head to the top of de bolt


Measuring lengths of Hex bolts



Explore the World of Piping


© Werner Sölken 2008 -  
All rights reserved.
www.wermac.org uses Google Analytics


Privacy Policy


I must be old. I still believe in respect.