 |
Piping Material Specification (Example) |
Standard No.... Doc. No....
Issue Date:.. Dec, 201913 of 15
Product Sampler Cooler
| MARK | DESCRIPTION | MATERIAL |
| 1 | FLANGE SW RF NPS 1/2 CL 150 | As per connecting piping classes to be stated on requisition |
| 2 | COIL NPS 1/2 LINE PIPE SCH 80 | |
| 3 | LINE PIPE NPS 3/4 SCH 80 | |
| 4 | FLANGE WN RF NPS 3/4 CL 150 | |
| 5 | LINE PIPE NPS 1.1/2 SCH 80 | |
| 6 | FLANGE SO RF NPS 1.1/2 CL 150 | |
| 7 | LINE PIPE NPS 10 SCH 30 | |
| 8 | BOTTOM PLATE | May be carbon steel |
| 9 | CLEATS | |
| 10 | STRIP |
Other Pages
- Table of contents
- Scope, codes, standards and references
- General and specific requirements
- Abbreviations for piping specifications
- Valve tag numbering
- Standard installation detail - Utility Station
- Special fabricated larger diameter reducers
- Four weld 90° LR Miter elbow
- Two weld 45° LR Miter elbow
- Perforated temporary conical strainers
- T-Type strainers
- Drip ring
- Product sampler cooler
- Tolerances for pipe fabrication
- Line Blinds NPS 1/2 - NPS 60
