 |
Equipment.. (3) |
ressure Vessels
 |
Spherical and Cylindrical Pressure Vessels According to the ASME Boiler and Pressure Vessel Code (BPVC), Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source as a result of a process, or any combination thereof .. |
| Article | |
Bonding Process
| |
Explosion Cladding Explosion Bonding or Explosion Cladding or Explosion Welding is a technically based industrial welding process. As any other welding process, it complies with well understood, reliable principles .. |
| Article | |
Distillation Column
| |
Types of Distillation Column A distillation column (or fractionation column) is a tall, vertical device used in chemical engineering to separate liquid mixtures into different components (fractions) based on their different boiling points .. |
| Article | |
| |
Distillation Column Internals Among other things, so-called trays are one of the main components in a column, designed to improve contact between rising vapor and falling liquid to ensure better separation .. |
| Article | |
| |
Demister Pad's in Process Piping The demister pads are used to removing micron-size liquid particles from a vapor stream .. |
| Article | |
| |
Manhole(s) in Process Piping A manhole is installed in storage tanks, pressure vessels, drums, columns and serves as a passage and vent for personnel during installation, repair, cleaning and maintenance .. |
| Article | |
Flaring in Industry
| |
A gas flare, alternatively known as a flare stack A gas flare is a important safety device used in refineries and petrochemical facilities. They safely burn excess hydrocarbon gases which cannot be recovered or recycled .. |
| Article | |
| |
Knock Out drum in Flaring system A Knock Out drum is a vessel in the flare header designed to remove and accumulate condensed and entrained liquids from the relief gases .. |
| Article | |
Filtration systems
| |
Pressure Leaf Filter Pressure Leaf Filters, in vertical or horizontal configurations, provide excellent removal of suspended solids from a field and are most commonly used in the filtration of crude oil, bleached oil, winterized oil, and nickel catalysts .. |
| Article | |
Cooling transfer
| |
Cooling tower Cooling towers are a special type of heat exchanger in which water and air interact to lower the temperature of hot water .. |
| Article | |
Formation of a vortex
| |
Vortex breaker A vortex breaker is installed to prevent the formation of a vortex when emptying a tank, for example .. |
| Article | |
Vacuum suction
| |
Vacuum Truck The vacuum truck (or vac truck) is a specialized industrial vehicle, equipped with a powerful pump, a storage tank and a suction hose .. |
| Article | |
Lifting and Rigging
| |
Types of Cranes A Crane means a powered device for lifting heavy loads was invented by the Ancient Greeks in the late 6th century .. |
| Article | |